FF TLF 4.000/6.000 6×4

Category:

Superstructure

  • The Flammifer FF TLF 4.000/6.000 industrial firefighting vehicle, 26 t GVW, with a short cab up to 3 crew members
  • It is suitable for fire extinguishing in industrial areas
  • Drive on both rear axles makes it easier to operate the vehicle in rugged terrain
  • Vehicle is equipped with normal-pressure centrifugal firefighting pump 6 000 l/min at 10 bars
  • 4 000 litres water tank and 6 000 litres foam tank located on the chassis between two compartments for firefighting equipment
  • Complete superstructure is made of light material (aluminium)
  • Two aluminium roller shutters with a bar lock on each side of the vehicle
  • On the backside door or roller shutter with a bar lock
  • Internal superstructure LED lighting is turned on during the opening of the superstructure
  • LED lighting of the surroundings, laterally and back
  • Easy removal of firefighting equipment and its large transparency
  • Heavier equipment fitted low and easily accessible

Chassis

  • Mercedes Actros 2640 6×4 EURO 6 or similar
  • Short cab for 3 crew members (1+2)
  • Wheelbase: 3900 mm + 1350 mm
  • Engine power: 400 HP / 294 kW
  • Dimensions of the vehicle: L x W x H: 9180 x 2500 x 3300 mm
  • GVW: 26.000 kg

Firefighting Equipment

  • 4000 l water tank and 6000 foam tank made of PPC
  • Normal-pressure pump type:
  • FPN 10 – 6000
  • HydroFoamMaster©
    • A system that provides direct injection foam proportioning for industrial operations
    • Especially represented in the chemical industry, refineries, etc.
    • Centrifugal fire pump completely independent of the foam
    • Completely independent outlets with respect to water, foam compound, and proportioning rate
    • Possibility of use same vehicle for simultaneous foam extinguishing and water cooling
    • Electronic controls govern the hydraulic foam compound pump drive
    • Proportioning units at each pressure outlet
    • Continuously variable proportioning rates of 1% to 7% can be selected on the outlets
    • Simple selection of foam compound source (foam tank or external source)
    • Control panel for foam tan filling
    • Automatic leveling for foam tank filling
    • Different types of the flushing process
    • The system uses a rugged gear pump for delivering foam compound, the pump is powered by controlled hydraulics from the vehicle engine
    • At the same time, flexible controls ensure that foam compound is delivered only when needed, this avoids the need for a return flow of foam compound to the foam tank, and it avoids the unnecessary risk of damage to the foam compound of fatigue
  • Ladders for roof access to the superstructure
  • Light mast with 4 LED reflectors 4x50W and pneumatic extractions

Signalization

  • Signalization of the vehicles according to regulations for firefighting vehicles
  • LED signal light bar on the roof of the vehicle
  • Two LED flashlights on the front and the back of the vehicle
  • Multi-tonal fire siren with PA system
  • Setup for installation of radio
  • All the main signs on the client’s language
  • All other signalization according to national regulations

Optional

  • Light mast with LED reflectors and pneumatic extraction
  • Roof turret: capacity of 2.400 lit/min, foldable with manual control of engine’s RPM
  • NP rapid intervention hose reel with 25 m of hose
  • Rescue winch

Gallery

Catalogue

EN – FF TLF 4000-6000 6×4

Related products